The LM318 is precision, fast operational amplifiers designed for applications requiring wide bandwidth and high slew rate. Features: 15 MHz small signal bandwidth, Maximum bias current of 250 nA, Internal frequency compensation, Input and output overload protected..
The LM339 series consists of four independent precision voltage comparators with an offset voltage specification as low as 2 mV max for all four comparators. These were designed specifically to operate from a single power supply over a wide range of voltages..
This LF353 device is a low-cost, high-speed, JFET-input operational amplifier with very low input offset voltage. It requires low supply current yet maintains a large gain-bandwidth product and a fast slew rate. In addition, the matched high-voltage JFET input provides very low input bias and offset currents. The LF353 can be used in applications such as high-speed integrators, digital-to-analog converters, sample-and-hold circuits, and many other circuits. Brand: Texas Instruments..
The LM358 is designed for general use as amplifiers, high-pass filters and low, band pass filters and analog adders.One of the characteristics of this IC is to be designed to operate with a single static power supply ranging from a minimum of 3 V to a maximum of 32 V although typically there are stabilizing at levels between 5 V and 15 V. In fact, while the majority of integrated circuits containing the operational needs two power supplies, one positive and one negative, the LM358 can be connected to the positive power only while the negative supply is replaced by the mass..
The LM358 (AS358Pp) is designed for general use as amplifiers, high-pass filters and low, band pass filters and analog adders.One of the characteristics of this IC is to be designed to operate with a single static power supply ranging from a minimum of 3 V to a maximum of 32 V although typically there are stabilizing at levels between 5 V and 15 V. In fact, while the majority of integrated circuits containing the operational needs two power supplies, one positive and one negative, the LM358 (AS358P) can be connected to the positive power only while the negative supply is replaced by the mass..
The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value up to 200. Brand: UTC.
The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 and 8 will increase the gain to any value up to 200..
The NE555 is a precision timer IC capable of producing accurate time delays or oscillation. In the time-delay or monostable mode of operation, the timed interval is controlled by a single external resistor and capacitor network. In the astable mode of operation, the frequency and duty cycle can be controlled independently with two external resistors and a single external capacitor..