ATmega16A-PU, High Performance, Low Power AVR 8-Bit Microcontroller..

Fan Blade Suitable for Motor Shaft Diameter 2mm.
Blade Diameter: 11cm (4.3"), Material: Unbreakable Plastic, Color Semi Transparent: Pink, Blue, Green, Yellow, Red, Orange etc..

This Gold Plated SMA Female PCB Mount Straight connector is directly soldered on PCB for reliable mounting of Antenna..

High Quality Neutrik style 6.35mm stereo jack plug, metal body with color housing
Common uses are: Guitars, Microphones, Keyboards, Effects Pedals, Professional Headphones, Mixing Consoles, Patch Bays, etc.
Color: Black, Qty: 1Pc.

MZ71 Series degaussing PTC Thermistors are specially designed for applications in automatic degaussing circuits of color TV sand Monitors etc,with the characteristics of low residual current and well reliability.
Operating temperature range: -10~+60ºC, Rated Voltage: AC 220V RMS, Maximal Operating Voltage: AC 270V RMS, Qty: 1pc..

This LPG Gas Sensor (MQ6), ideal sensor for use to detect the presence of a dangerous LPG leak in your Home, car or in a service station, storage tank environment. The sensor can also sense iso-butane, propane, LNG and cigarette smoke..

The PIR Sensor module allows you to sense motion. It is almost always used to detect the motion of a human body within the sensor's range. The PIR sensor module provides an output "HIGH" when a human body is detected within its range and an automatic Delay "LOW" when the body leaves its range. The delay time is adjustable using the potentiometer on-board. The minimum delay time that can be set is 5 seconds and maximum of 200 seconds. The blocking time potentiometer is also provided on-board to set the blocking time during which the sensor does not respond to any change in motion. The minimum blocking time that can be set is 2.5 seconds and maximum of 10 seconds.
Specifications:
   • Infrared sensor with control circuit board
   • The sensitivity and holding time can be adjusted
   • Detecting Range: Approx. 7m / 23 feet
   • Detecting Angle: Less than 100 degrees
   • Working Voltage Range: DC 5V- 20V
   • Quiescent Current: Less than 50uA
   • Level Output Voltage: High 3V / Low 0V .

Solid State Relay PCB with All Components.
Kit Components: (PCB 1pc, 1N4007 4pcs, MOC3041 1pc, IC Base 6-Pin 1pc, 5mm Red LED 1pc, 2-Pin Relimate Male 0.2" 1pc, 68 Ohm 1pc, 47 Ohm 1pc, 56 Ohm 1W 1pc, 330 Ohm 1W 1pc, 39 Ohm 1W 1pc, 0.01uF Capacitor 1pc, BTA12 1pc, Heatsink 1pc, PCB Terminal Block 2pcs, Screws 3pcs, nut 1pc, Components Layout Circuit 1pc)..

CMOS Integrated DTMF Receiver/Decoder
The CM8870PI provides full DTMF receiver capability by integrating both the bandsplit filter and digital decoder functions into a single 18-pin DIP..

32K SERIAL I2C BUS EEPROM.

USB Cable for Arduino UNO - MEGA 2560, USB-A to USB-B Cable 30cm..

Diode Based OR Gate Circuit on Dot Matrix General Purpose PCB (Assembled Full Working Project)
Components Used: Tact Switches, LED's, Resistors, Diodes, Connector, Battery, Dot-Matrix PCB etc.
Project Content: Assembled Project PCB - 1pc, Battery Cable - 1pc, 9V Battery - 1pc..

Over Load and Short Circuit Protection Circuit PCB Only with Copper Pour.
Protecting your layout from short circuits and overloads is essential to prevent damage to equipment.
PCB Size: 3.9"x5.9" (99mm x 150mm),

---

Components List for this PCB: ( Show More ) .

Unbrako Hex Socket Set Screw (Grub Screw) with Knurled Cup Point.
Thread (Dia.): 1/4" (6.35mm) BSW, Length: 1" (25mm), Allen Key Size: 1/8".

Medium Quality 6.35mm stereo jack plug, Nickel plated, full metal body with spring.
Common uses are: Guitars, Microphones, Keyboards, Effects Pedals, Professional Headphones, Mixing Consoles, Patch Bays, etc.
Qty: 1Pc.