OR Gate Using Switch, LED And Diodes On Breadboard Size: 7"x2.5", Components Used: Breadboard 840 Point (1pc), Breadboard Jumper Wires, Diode 1N4007 (2pcs), LED 5mm Red (2pcs), LED 5mm Green (1pc), Resistor 0.25W 1K (2pcs), Resistor 0.25W 680 Ohm (1pc), Tact Switch (2pcs), Relimate 2-pin Male Header 5.08mm (1pc), Battery 9V (1pc), Snap Connector 2-Pin (1pc).Note: You can change the components according to your requirement. OR Gate Project:OR Gate Using Diode on Dot Matrix PCB
Pre-cut, pre-formed and pre-stripped wires simplify and speed up Breadboard Prototyping Circuits. Wire: 22SWG (Diameter: 0.711mm) Insulated Solid Tinned Copper Wire,Length: 0.3 to 1.4 Inch (7.5mm to 35.5mm) ±1mm,Breadboard Pitch: 3 to 14,Quantity: 30pcs,Color: Assorted..
Battery Snap for 9V battery with two female header pins in red (+) and black (-) color wires, Used to connect battery directly to the circuit or projects board male header pins. Battery Snaps also enable connections to be changed quickly and easily..
Electronic Circuit and Project Board, Educational and Testing Devices 128 Group of 5 Connected Terminals, 8 Bus of 25 Connected Terminals. Size: 175mm x 67mm x 8mm, Total Point: 840.
